» Warehouse » Fixed warehouse shelving » Bulk Storage Racks

Bulk Storage Racks

Bulk Rack Shelving is designed for goods or raw materials that are loaded manually. The product is very suitable for warehouses with high ceilings, which contain medium-heavy and semi-bulky objects. By creating aisles and using stairs, this shelving can be implemented in 2 to 4 floors, which helps to benefit from the maximum height of the room.
Back to the list

It should be noted that these racks were produced in response to the need to keep or shop for raw materials or products that are loaded by workers. This model has been designed for warehouses, storage of essential goods and end products and spare parts. This rack is suitable for bulky goods with medium weight that are loaded by workers or forklifts. Considering the height of the rooms, Ozhan has designed these storage racks for high ceiling storage rooms. In this system, the loading is done by machines, so there is the choice to better use this height. In addition, by creating aisles and using stairs, this shelf can be implemented in 2 to 4 floors, which helps to benefit from the maximum height of the room. For easy access to the floors, there are stairs and elevators between shelves. All these parts are produced from the same material as the shelf. For aisle and stairway floors, special slabs/segments are used.

- Very economical - Produced in various widths and dimensions - Different shelves for easy access to objects - Application of a stainless galvanized sheet compatible with cold rooms and wet spaces - The capability to decrease and increase the space between shelves to meet potential needs. - Available in different colors - The frames of these shelves are composed of closed-opening columns (like a profile), with horizontal and diagonal braces and base plates in different widths and lengths, in order to promote strength and practicality. - The possibility to add roofs to the highest floors to save profitable space deposits - The design and implementation according to the measurements and the height of the room in different floors with stairs, walkways and ramp - Access to objects from all sides - The weight tolerance of the arms and bottom plates is calculated in proportion to a large balanced load and on the customer's demands.

- The space between the shelves can vary between 100 cm and 300 cm. - The height of the racks can reach up to 1200 cm as needed by the customer. - The depth is variable from 60 cm to 120 cm. - The arms consist of profiles and framed rolls, and the clip has 4 and 5 nails. They are attached to the arm with CO2 welding and are planned for diversified loadings and variable openings. These arms are conceptualized so that the vertical space is conveniently modifiable. - All base plates conform to standards and are grounded with two Hilti anchor bolts. - The columns are made according to the loading of a machine and the distance between the shelves in addition to the distance between the first floor and the floor surface. - On the customer’s order, a space for the indicator cards is designed on the arms to codify, lead to the contents, etc. - Calculations of the frame plan and frames are based on the loading of each rack in addition to the aisles, which are also calculated according to the weight loaded on the surface in Kg/m2. - The colorization of the parts: the degreasing and phosphating phases are done by 200 spray nozzles, followed by the polishing phase by washing nozzles. The parts are then dried in the conveyor oven and painted by powder color spray robots. Finally, at the passage of a furnace of 40 m and 200°C, the parts are cooked and ready to be packed. - Depending on the type and sensitivity, the parts are packed with bubble plastic, a special plastic material, strapping bands, separately wrapped with polystyrene to minimize the risk of damage during transport. - All parts have a certificate and an identification card and a quality assurance of quality department.

- Customized depository study and AutoCAD and 3D plan offer - Offering a 2D and 3D plan for the racks - One-year warranty and various services - 15 years of after-sales services - Training on the application of the implemented system